Abstract
Among the list of dispersion parameters effect of solid concentration, slurry pH, stirring speed and time were studied in Part I for stablization of Dilband iron ore slurry. In Part II the study is extended to survey most appropriate dispersant and its optimal dose. In present study sodium silicate (SS), sodium hexametaphosphate (SHMP), sodium pyrophosphate (SPP), and ethylene-diamine-tetraacetatic-acid (EDTA) dispersants were used. The different doses of these dispersants were studied at solid concentration 7.5%, pH 10.5, stirring speed 2000rpm, and stirring time 5min, as optimal conditions found in Part I. Marginal improvement in slurry stabilization with addition of SS, SHMP, SPP, and EDTA was noted, however EDTA found to be most effective in stabilizing the slurry as compared to others. For the different doses of EDTA, SPP, SHMP, and SS tested, the best disperse abilitywas obtained at concentration of 0.135%, 0.025%, 0.2%, and 1.25% respectively
M.I. Abro, A.G. Pathan, Bohm Andreas, A.H. Mallah. (2010) Effect of Various Parameterson the Dispersion of Ultra Fine Iron Ore Slurry. Part-2, Pakistan Journal of Analytical & Environmental Chemistry, Volume 11, Issue 2.
-
Views
1112 -
Downloads
69
Article Details
Volume
Issue
Type
Language
